TALK VoIP Phone with 5" HD LCD and Touch Model: UVP-Touch UT-Phone-Touch
Package Contents UniFi TALK VoIP Phone Touch Installation Requirements • UniFi Switch or PoE+ (802.
Camera Built-in camera can be used for snapping photos for avatars or videoconferencing applications. Touchscreen The touchscreen display is used for all interface navigation and dialing. Keypad Touch to display the numeric keypad. Volume Use the volume arrows to adjust audio levels. LED The LED will illuminate when the device is first connected to a 48V power source. Once the phone has started up, the LED will turn off. IMPORTANT: The LED will flash when a firmware update is occurring.
PoE/LAN The PoE/LAN Ethernet port is 802.3at-compliant and is used to connect data and power to the phone. Connect this port to the same network as the UniFi Security Gateway VOIP port. PC The Ethernet port labeled PC is used for bridging. WARNING: Do not connect a powered Ethernet connection to the port labeled PC. Side Ports USB C Port The USB C port can be used to charge a device. Headset Jack 3.5 mm jack for optional wired stereo and microphone headsets.
Handset Mute button Mute Press the Mute button to mute the microphone on the handset. Hardware Installation 1.
2. PoE/LAN PC Configuration Enter the SIP server address, username, and password.
Making a Call Lift the handset to make a call and the keypad will appear. Use the Delete button to correct any mistakes. Press the Call button to make a call.
Call Manager Connected Number Displays the extension or phone number that is being dialed or that is currently connected. Volume Slider Use the slider to increase or decrease the volume level. Connection Status Displays “Dialing” or the total elapsed time of the currently connected call. Mute Mute the microphone so that audio is not broadcast. Hold Place the caller on hold. Hold music will be played. Add Call Press to add another call for a group conversation.
Specifications UVP-Touch UT-Phone-Touch Dimensions 166 x 140 x 182.5 mm (6.50 x 5.50 x 7.19") Weight 1.10 kg (2.
Important Warning Regarding Emergency Calls NOTE THAT THE LIMITATIONS SET FORTH BELOW ARE APPLICABLE TO ALL EMERGENCY CALLS, FUNCTIONS AND SERVICES, INCLUDING 911, ENHANCED 911 AND 112 CALLS (COLLECTIVELY, “EMERGENCY SERVICES”). 1. You should be aware that: a. Emergency Services may not connect to the Public Service Answering Point (“PSAP”), or may ring to the administrative line of the PSAP, which may not be staffed after hours, or by trained emergency operators. b.
Safety Notices 1. 2. 3. Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. Electrical Safety Information 1. 2. 3. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label.
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B) Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est soumis aux deux conditions suivantes: 1. Cet appareil ne peut pas provoquer d’interférences et 2.
Note: All countries listed may operate at 30 dBm. BFWA member states may operate at 36 dBm. Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band. RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity български [Bulgarian] С настоящото UBIQUITI NETWORKS декларира, че това устройство UVP-Touch е в съответствие със съществените изисквания и други приложими разпоредби на Директиви 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovim putem izjavljuje da je ovaj uređaj UVP-Touch sukladan osnovnim zahtjevima i ostalim bitnim odredbama Direktiva 2014/53/EU.
Italiano [Italian] Con la presente, UBIQUITI NETWORKS, dichiara che questo dispositivo UVP-Touch, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti delle direttive 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: www.ubnt.com/compliance Latviešu valoda [Latvian] Ar šo, UBIQUITI NETWORKS, deklarē, ka UVP-Touch ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem noteikumiem Direktīvās 2014/53/ES.
www.ubnt.com ©2019 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. Google, Android, Google Play and other marks are trademarks of Google Inc. All other trademarks are the property of their respective owners.
