User Guide

Optional WAN Port Configuration via Layer 3
By default, the WAN port is set to DHCP so it can be assigned
network settings by the service provider. To change the
setting, connect a computer directly (or through a switch) to
the LAN port of the UniFi Security Gateway.
1. From a web browser, go to https://setup.ubnt.com/
https://setup.ubnt.com
2. The UniFi Gateway login window will appear. Enter your
Username and Password. Click Sign In.
Note: If the UniFi Security Gateway has not been
adopted by a UniFi Controller, the login window will
be skipped and the Setup window will appear.
3. In the Setup window, click Edit Configuration to configure
the WAN port to DHCP, Static IP, or PPPoE.
For information on using the UniFi Controller software, refer to
the User Guide located on our website at:
documentation.ubnt.com/unifi