Quick Start Guide

Optional WAN Port Configuration via Layer 3

By default, the WAN port is set to DHCP so it can be assigned

network settings by the service provider. To change the

setting, connect a computer directly (or through a switch) to

the LAN 1 port of the UniFi Security Gateway.

1. From a web browser, go to https://setup.ubnt.com/

https://setup.ubnt.com

2. The UniFi Gateway login window will appear. Enter your

Username and Password. Click Sign In.

Note: If the UniFi Security Gateway has not been

adopted by a UniFi Controller, the login window will

be skipped and the Setup window will appear.

3. In the Setup window, click Edit Configuration to configure

the WAN port to DHCP, Static IP, or PPPoE.

For information on using the UniFi Controller software, refer to

the User Guide located on our website at: