User Guide

88
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 12: UniFi Access Point Details
UniFi Access Point – Guests
Name Displays the hostname, alias, or MAC address of the
connected guest. You can click the name to get additional
details; see “Client Details” on page 97 for more
information.
WLAN Displays the name or SSID of the wireless network
in use.
Signal Displays the percentage of signal strength
between the guest and AP.
TX Displays the transmit rate.
UniFi Access Point – Configuration
Change device configuration settings.
Alias
Alias Enter or edit the customizable name or identifier of
the AP. The Alias is also known as the host name.
Apply Click Apply to save the change.
Radios
Channel Select the appropriate settings:
• Auto/(channel number) Select a channel number or
keep the default, Auto.
• HT20/HT40/HT80 Select HT20 for 20 MHz operation,
HT40 for 40 MHz operation, or HT80 for 80 MHz
operation in the 5 GHz band.
Note: If the AP is part of a Zero Handoff WLAN
Group, then the Channel settings cannot be
changed.
TX Power By default the transmit power is set to Auto.
You can also manually select the following:
• High The highest TX power available.
• Medium Halfway between High and Low.
• Low The lowest TX power available.
• Custom Custom setting that you specify in the field
provided.
• Antenna Gain (Only available for Outdoor models)
Specify the antenna gain.