User Guide

81
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 11: UniFi Switch Details
Network
Configure IP Select the Internet connection type for your
service.
• Using DHCP The use of the Dynamic Host
Configuration Protocol (DHCP) is the default. The Switch
automatically acquires network settings from the
network’s DHCP server.
• Static IP Assign fixed network settings to the Switch.
Enter the following information:
- IP Address Enter the IP address for the Switch.
- Subnet Mask Enter the subnet mask of the Switch.
- Gateway Enter the IP address of the gateway (for
example, the UniFi Security Gateway).
- Preferred DNS Enter the IP address of the primary
DNS server.
- Alternate DNS Enter the IP address of the secondary
DNS server.
- DNS Suffix Enter the Fully Qualified Domain Name
(FQDN) without the hostname.
• Apply Click Apply to save changes.
Copy Config
If you have settings that you want to apply to multiple
Switches, use this option to copy the configuration.
Copy from Select the appropriate Switch whose
configuration will be copied to this Switch. Then click
Confirm to overwrite its current configuration with the
configuration of the selected Switch.