User Guide

72
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 10: UniFi Security Gateway Details
Create or Edit Port Forwarding Entry
Name Enter a name to identify this port forwarding entry.
From The default is Anywhere, which accepts traffic from
any source IP address. To specify a source IP address,
select Limited and enter the source IP address in the field
provided.
Port Enter the port or ports that will be forwarded to the
LAN (also known as the external port or ports). You can
identify the port or ports by name, number, and/or range.
To specify multiple ports, use a comma-separated list
(example: 20-23,554).
Forward IP Enter the LAN IP address that will receive the
forwarded port traffic.
Forward Port Enter the port or ports that will receive
the forwarded port traffic (also known as the internal
port). You can identify the port or ports by name, number,
and/or range. If you do not specify this port, then the
original destination port of the traffic will beused.
Advanced Options
Protocol Select the protocol that will be forwarded: Both,
TCP, or UDP.
Apply Click Apply to save changes.
Cancel Click Cancel to discard changes.
Dynamic DNS
Create Click to add a new entry. Go to the Create
or Edit DDNS Entry section on the next page.
Service Displays the name of your Dynamic DNS (DDNS)
service provider.
Hostname Displays the host name of the device.
Username Displays the user name of the DDNS account.
Password Displays the password of the DDNS account.
Server Displays the address of your DDNS server.
Actions Click a button to perform the desired action:
• Edit Click to edit the DDNS entry.
• Delete Click to delete the DDNS entry.