User Guide

71
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 10: UniFi Security Gateway Details
• PPPoE Point-to-Point Protocol over Ethernet (PPPoE)
is a virtual private and secure connection between two
systems that enables encapsulated data transport. Enter
the following information:
- Username Enter the username used to connect to
the PPPoE server.
- Password Enter the password used to connect to the
PPPoE server.
- Preferred DNS Enter the IP address of the service
provider’s primary DNS server.
- Alternate DNS Enter the IP address of the service
provider’s secondary DNS server.
• Use VLAN ID To use a VLAN, select Use VLAN ID and
enter the VLAN ID number.
• Apply Click Apply to save changes.
• Disabled If you are not using the WAN 2 port, then
select Disabled.
• Apply Click Apply to save your change.
Port Forward
Create Click to add a new entry. Go to “Create or
Edit Port Forwarding Entry” on page 72.
Name Displays the name of the port forwarding entry.
From Displays the source IP address, if specified.
Port Displays the port or ports that will be forwarded to
the LAN. Also known as the external port(s).
Dest IP/Port Displays the destination IP address and
port(s) that will receive the forwarded port traffic. Also
known as the internal port(s).
Actions Click a button to perform the desired action:
• Edit Click to edit the port forwarding entry.
• Delete Click to delete the port forwarding entry.