User Guide

69
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 10: UniFi Security Gateway Details
UniFi Security Gateway – Statistics
Click Statistics to display the bandwidth usage
information, which is available if the DPI feature is enabled
(refer to “Settings > Site” on page 18 for more
information).
Total Usage Displays the following:
• Total bandwidth usage
• Total download bandwidth usage
• Total upload bandwidth usage
(DPI category) Displays the following:
• Percentage of total bandwidth used
• DPI category name
• Total bandwidth usage
• Download bandwidth usage
• Upload bandwidth usage
(DPI subcategory) Displays the following:
• DPI subcategory name
• Percentage of bandwidth used within the DPI category
You can click the DPI subcategory to view the DPI
subcategory usage broken down by client:
• Name/MAC Address Displays the hostname, alias, or
MAC address of the connected client. You can click the
name to get additional details; see “Client Details” on
page 97 for more information.
• Packets Displays the number of packets transferred.
• Bytes Displays the number of bytes transferred.
UniFi Security Gateway – Networks
Click Networks to display the network name, IP address,
TX and RX throughput, and number of clients.
Network Displays the name of the network.
IP Displays the local IP address of the network.
TX Displays the outgoing (transmit) throughput.
RX Displays the incoming (receive) throughput.
Num Hosts Displays the number of clients on the
network.