User Guide

68
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 10: UniFi Security Gateway Details
The bottom of the window has three buttons:
• Locate Click to flash the Status LED on the
Gateway and the Gateway’s icon on the Map tab so you
can locate it. The LED will flash until the Locate button is
clicked again. (The icon on the Map tab will flash three
times and stop.)
• Restart Click
to restart the Gateway.
• Upgrade If a software upgrade is available for the
Gateway, click
to install the latest UniFi
firmware on the Gateway. The Status will appear
as Upgrading until the process is complete and the
Gateway reconnects to the UniFi Controller software.
UniFi Security Gateway – Details
Click Details to display the device specifics, LAN/WAN
connection details, and uptime.
Overview
Overview
MAC Address Displays the MAC address or unique
hardware identifier of the Gateway.
Model Displays the model name of the Gateway.
Version Displays the version number of the Gateway’s
firmware.
LAN IP Address Displays the local IP address of the
Gateway.
Uptime Displays the duration of time the Gateway has
been running without interruption.
WAN
The number of WAN sections will vary depending on the
number of active WAN ports.
Overview
IP Address Displays the WAN (public) IP address of the
WAN interface.
Speed Displays the connection speed in Mbps.
Duplex Displays the mode, Full Duplex or Half Duplex.
Down Pkts/Bytes Displays the amount of data
downloaded as packets and bytes.
Up Pkts/Bytes Displays the amount of data uploaded as
packets and bytes.
Down Activity Displays the level of download activity in
Bytes per second.
Up Activity Displays the level of upload activity in Bytes
per second.