User Guide

67
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 10: UniFi Security Gateway Details
Chapter 10: UniFi Security
Gateway Details
The UniFi Security Gateway hyperlink opens the UniFi
Security Gateway’s Details window either in the Properties
tab or as a separate popup window. You can always dock
this window in the Properties tab or detach it as a separate
window.
The top of the window displays the device icon and name
(or MAC address).
Properties
The Properties tab is hidden by default. To display it, click
the properties icon. The Properties tab appears on the
right side of the screen.
Information about each selected device appears as a
popup within this tab.
Close Click to close the Properties tab and device
popups.
Minimize Click to close and re-open the device
popups.
Each row displays the following:
• (icon) Displays the icon of the device (the icon will vary
depending on the model).
• Name/MAC Address Displays the hostname, alias, or
MAC address of the device.
• Display Click to display the device information.
• Detach Click to display the same information in a
separate popup screen that can be moved anywhere
within the browser screen.
• Close Click to close the device popup.
Hide Click to hide the Properties tab but allow the
device popups to remain accessible from this tab.
If you are using the USG-PRO-4 model, then the upper part
of the detached popup screen has four icons:
• LAN1
• LAN2
• WAN1
• WAN2
If you are using the USG model, then the upper part of the
detached popup screen has three icons:
• WAN
• LAN
• VOIP (enabled in “Settings > VoIP” on page 29)
A green icon indicates an active port, and a black icon
indicates no activity. A gray icon indicates a disabled port
(VoIP requires UniFi Controller v4.6 or higher).
There are four clickable tabs:
• “UniFi Security Gateway – Details” on page 68
• “UniFi Security Gateway – Statistics” on page 69
• “UniFi Security Gateway – Networks” on page 69
• “UniFi Security Gateway – Configuration” on page
70