User Guide

60
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 9: Insights
A secondary filter is available:
• Blocked Only display blocked clients.
• Noted Only display clients whose configurations
include notes. (See “Wireless Client – Configuration”
on page 99 or “Wired Client – Configuration” on
page 101 for more information.)
• Static IP Only display clients using static IP addresses.
A tertiary filter is available:
• All Display all clients, regardless of connection type.
• Wireless Display all wireless clients.
• Wired Display all wired clients.
Last Seen Filter the results on the page based on the
date the client was last seen. Select 1 Day, 3 Days, 7 Days,
2Weeks, 1 Month, 2Months, or 1 Year.
Name/MAC Address Displays the hostname, alias, or
MAC address of the connected client. You can click the
name to get additional details; see “Client Details” on
page 97 for more information.
Manufacturer Displays the name of the device
manufacturer.
User/Guest Indicates whether the client is/was
connected to a primary or guest network.
Down Displays the total amount of data downloaded by
the client.
Up Displays the total amount of data uploaded by
theclient.
Last Seen Displays the last date and time the client was
connected.
Actions Click a button to perform the desired action:
• Block Click to block this client from accessing
the network.
• Reconnect Click
to reconnect a wireless
client. You can click to kick out a client,
which usually reconnects back quickly; this is useful for
troubleshooting or resolving a problematic wireless
connection.
• Unauthorize/Authorize (Available for Guests only.)
Click
to remove authorization of guest
access and disconnect the guest, or click for
guests pending authorization.
Rogue Access Points
Last Seen Filter the results on the page based on the
time the AP was last seen. Select 1 Day, 3 Days, 7 Days,
2Weeks, 1 Month, 2Months, or 1 Year.
Name/SSID Displays the name of the wireless network.
BSSID Displays the MAC address of the AP’s wireless
interface.
Channel Displays the channel setting that the AP was
detected on.
Security Displays the security status indicating whether
encryption is used.
Manufacturer Displays the name of the AP manufacturer.
Location Displays the name of the closest AP managed
by the UniFi Controller. You can click the name to get
additional details on the AP.