User Guide

40
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 5: Map
Options
Click a UniFi icon to reveal options. Click the UniFi icon
again to hide them.
Lock Lock the device icon to its current location.
Details Display the Details screen. For more
information, go to the appropriate chapter:
• “UniFi Security Gateway Details” on page 67
• “UniFi Switch Details” on page 75
• “UniFi Access Point Details” on page 83
• “UniFi VoIP Phone Details” on page 95
Statistics (Available for the UAP-AC-LITE,
UAP-AC-LR, UAP-AC-PRO, and UAP-AC-EDU only.)
Displays the RF Environment screen. For more
information, go to “RF Environment” on page
86.
Remove Remove the device icon from its location.
Map Display Options
The Map screen can display the devices with the following
options:
Each device is displayed with its names. If no custom label
is applied, the device’s MAC address will be displayed.
To change a name applied to a device, refer to Alias in the
appropriate section:
• “UniFi Security Gateway – Configuration” on page
70
• “UniFi Switch – Configuration” on page 79
• “UniFi Access Point – Configuration” on page 88
• “Create or Edit an Extension” on page 29 (to
change the name of a UniFi VoIP Phone)
Details Displays the applicable information:
transmit/receive channel, signal strength, supported
standards, device name, MAC address, number of users
connected, and number of guests connected.
You can apply one of the following filters:
• 2G Displays the 2.4 GHz information.
• 5G Displays the 5 GHz information.
Coverage Displays a visual representation of the wireless
range covered by any APs.
You can apply one of the following filters:
• 2G Displays the 2.4 GHz information.
• 5G Displays the 5 GHz information.