User Guide

28
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 3: Using the UniFi Controller Software
Role Displays the permissions level: Admin (read/write
access) or Read Only.
Actions Click a button to perform the desired action:
• Revoke Click
to remove the selected account.
• Re-invite Click
RE-INVITE
to re-send an invitation to a
pending account.
• Edit Click
to make changes.
Create New Admin Click
to add a new site
admin. Go to the Create or Edit an Admin section.
To create operator accounts for the Hotspot Manager, see
“Operator Accounts” on page 105.
Create or Edit an Admin
• Email Enter the email address of the new administrator.
• Admin Name Enter the name of the new administrator.
• Invite to SDN Select this option to allow the new
administrator access to SDN (Software-Defined
Networking) settings. The new administrator must use
his or her own cloud account (linked to the same email
address) to manage the UniFi Controller. The admin
who issued the invitation can select which role the
new administrator will have with respect to the UniFi
Controller.
• Role Select Administrator (read/write access) or
ReadOnly.
• Invite Click to send an email invitation.
• Cancel Click
CANCEL
to discard changes.
Settings > User Groups
Configure user groups on this screen. The default user
group is named Default and has no bandwidth limits.
User Group Settings
Name Displays the name of the user group.
Bandwidth Limit Displays the upload and download
limits.
Actions Click a button to perform the desired action:
• Edit Click
to make changes to the user group
settings. Go to the Create or Edit a User Group section.
• Delete Click to delete the user group. (The
Default user group cannot be deleted.)
Create New User Group Click to create
a new user group. Go to the Create or Edit a User Group
section.
Create or Edit a User Group
• Name Enter or edit the name of the user group.
• Bandwidth Limit (Download) Select to limit the
download bandwidth. Enter the maximum in Kbps.
• Bandwidth Limit (Upload) Select to limit the upload
bandwidth. Enter the maximum in Kbps.
• Save Click
to apply changes.
• Cancel Click
CANCEL
to discard changes.
See “Wireless Client – Configuration” on page 99
or “Wired Client – Configuration” on page 101
for information on how to assign a user or guest to a
usergroup.