User Guide

21
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 3: Using the UniFi Controller Software
- WPA-Enterprise WPA Enterprise uses a RADIUS
server to authenticate users on the wireless network.
• RADIUS Auth Server Provide the following
information about the RADIUS authentication
server:
• IP Address Enter the IP address.
• Port Enter the port number. The default is 1812.
• Password Enter the password.
• Delete Click the delete
icon to remove this
authentication server.
• Add Auth Server If you have another
authentication server, click this option and
complete the IP Address, Port, and Password fields.
• RADIUS Accounting Server Provide the following
information about the RADIUS server:
• IP Address Enter the IP address.
• Port Enter the port number. The default is 1813.
• Password Enter the password.
• Delete Click the delete
icon to remove this
accounting server.
• Add Acct Server If you have another accounting
server, click this option and complete the IP
Address, Port, and Password fields.
• Guest Policy Select this option to enable guest access
policies on this wireless network.
Advanced Options
• VLAN To use a VLAN, select Use VLAN ID and enter the
VLAN ID number.
• Hide SSID Select this option if you don’t want the
wireless network name or SSID to be broadcast.
• WPA Mode (Available if WPA security is enabled.) Select
the appropriate WPA method: Both, WPA1 Only, or
WPA2 Only (default).
• Encryption Select the appropriate encryption method:
Auto, TKIP Only, or AES/CCMPOnly (default).
• User Group Assign wireless users to a specific user
group. For more information about user groups, see
“Settings > User Groups” on page 28.
• UAPSD Disabled by default. Unscheduled Automatic
Power Save Delivery. Select this option to enable the
power save mode of Wi-Fi devices.
• Scheduled Select Enable WLAN Schedule to restrict
wireless access to the schedule you set.
- Monday-Sunday Select the days you want to
schedule.
- Hours Use the sliders to select the start and end
times of the day’s wireless access.
• Save Click
to apply changes.
• Cancel Click
CANCEL
to discard changes.
Settings > Networks
Configure the networks for each site.
Networks
Name Displays the network name.
Purpose Displays a description of this network.
Subnet Displays the IP address and prefix size.
VLAN Displays the VLAN ID, if applicable.
Actions Click a button to perform the desired action:
• Edit Click to make changes to the network
settings. Go to “Create or Edit a Network” on page
22.
• Delete (Not available for the default network.) Click
to remove the network.
Create New Network Click
to add a
network. Go to “Create or Edit a Network” on page 22.