User Guide

Chapter 2: UniFi CloudUniFi Controller User Guide

Ubiquiti Networks, Inc.

Instructions for Other Web Browsers

1. Ensure that your host system is on the same Layer-2

network as the UniFi CloudKey.

2. The UniFi Cloud Key is set to DHCP by default, so it

will try to automatically obtain an IP address. Assign a

specific IP address to the UniFi Cloud Key, or check the

DHCP server for its IP address.

Note: The default fallback IP address of the UniFi

Cloud Key is 192.168.1.30.

3. Launch the web browser. In the address field, type

https:// followed by the appropriate IP address. Press

enter (PC) or return (Mac).

4. Click Manage to run the UniFi Setup Wizard.

Note: You can click Configure to change the

settings of the UniFi Cloud Key (refer to “UniFi

Cloud Key Configuration” on page 8 for

more information). The default login is ubnt/ubnt

or root/ubnt.

5. The UniFi Setup Wizard screen appears. Alternatively,

you can click restore from a previous backup to use a

file that contains your backup settings. Click Next.

Note: U.S. product versions are locked to the U.S.

Country Code to ensure compliance with FCC

regulations.

6. Select the devices that you want to configure and

clickNext.

7. The UniFi Setup Wizard will create a secure primary

wireless network for your devices. Perform the

following steps:

a. Enter the wireless network name (SSID) in the Secure

SSID field.

b. Enter a passphrase to be used for your primary

network in the Security Key field.

c. To enable guest access, select Enable Guest Access,

and enter a guest network name in the Guest

SSIDfield.

d. Click Next.

8. Enter an admin name in the Admin Name field and

password in the Password field to use when accessing

the management interface as a super admin. Confirm

your password in the Confirm Password field. Click Next.