User Guide

115
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Appendix C: Mobile Apps
Appendix C: Mobile Apps
Overview
Ubiquiti Networks offers two UniFi mobile apps:
• UniFi EasySetup App You can use a mobile device
to provision a UniFi AP for basic functionality without
configuring a UniFi Controller.
• UniFi EDU App You can use the UAP-AC-EDU to
broadcast announcements with clarity from your
mobiledevice. Refer to “UniFi EDU App” on page 117
for more information.
UniFi EasySetup App
The Android version can set up any UniFi AP. The
iOS version can set up the UAP‑AC‑LITE, UAP‑AC‑LR,
UAP‑AC‑PRO, or UAP‑AC‑EDU. A future upgrade will
enable the iOS version to set up any UniFi AP.
Requirements
• An Ethernet connection from the UniFi AP to the LAN
with DHCP
• Firmware version 3.4.4.3231 or higher
• A compatible Android or iOS device
The following instructions describe the Android version of
the app; however, the iOS version is similar.
1. Download the UniFi AC EasySetup App from the
AppStore (iOS) or the UniFi EasySetup App from
Google Play
™
(Android).
2. Launch the app, and use one of the following options:
• Log In Enter the Username and Password of your
Ubiquiti Single Sign‑On (SSO) account. Tap Log In.
• Register To register for an SSO account, tap
Register.
• Continue If you do not want to back up or restore
configurations, you can skip the login and tap
Continue.
3. The app will search for new devices. Tap the UniFi AP
on the device list and go to step 5.
If a new device is not detected, you have two options:
• Scan QR Code Tap Scan QR Code and go to step 4.
• Wi-Fi Settings Tap Wi-Fi Settings and connect to
your Wi-Fi network. Then the app will run a search
again.
4. Scan the QR code on the back of the UniFi AP, or
tap You can enter your ID manually to type the
case-sensitive MAC address.
Note: For Android, the mobile device
automatically connects to the helper SSID. For
iOS, manually copy and paste the helper SSID
and password.