Specification Sheet

UniFi Controller
Designed for convenient
management, the UniFi Controller
software allows admins to congure
and monitor the UniFi Switch and
other UniFi devices using a graphical
user interface. You can download
the controller from www.ubnt.com
at no additional charge – there is
no separate software, licensing, or
support fee.
Multi-Site Management
A single instance of the UniFi
Controller running in the cloud can
manage multiple UniFi sites within
a centralized interface. Each site
is logically separated and has its
own unique network monitoring,
conguration, maps, statistics, and
admin accounts.
Switch Conguration
You can access any managed UniFi
Switch through the UniFi Controller to
congure a variety of features:
PoE setting per port
Operation mode (switching,
mirroring, or aggregate) per port
Network/VLAN conguration
Jumbo frame and ow control
conguration
Network settings
Storm control setting per port
Spanning tree conguration
Switch Port Status
You can also view status information
for each port:
Connection speed and duplexmode
TX/RX data rates
PoE status
Network/VLAN setting
Statistics
The Switch Statistics screen displays a graphical overview of all LAN throughput
for each port on the selected switch. Under the same pane of glass, it also shows
LAN, WLAN, and Internet trafc, including the breakdown of protocols being used
(requires a UniFi Security Gateway).
Topology View
The Topology screen displays a topology diagram of your UniFi system. You can
lter the type of information displayed, such as client devices, labels, and link
settings.
Software Features
The UnIFi Controller software offers
the following features:
Auto-generated topology view
Centralized statistics in controller
RSTP and Spanning Tree Protocol
SNMP
Storm control (independent
broadcast, multicast, and unknown
destination unicast limits per port)
802.3x ow control
9216-byte jumbo frame support
VLAN support
Port mirroring
Port aggregation (LACP)
Port isolation (protected port) for
port-level isolation
Centralized conguration
management (including
conguration cloning)
Auto-MDIX automatically adjusts
as needed for straight through or
crossover cable
802.1X (RADIUS) authentication and
dynamic VLAN
Datasheet
3