8-Port Managed Gigabit Switch with 802.
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® 8-Port Managed Gigabit Switch with 802.3af PoE. This Quick Start Guide is designed to guide you through the installation and also includes the warranty terms. Package Contents UniFi Switch Mounting Screws (Qty. 2) Screw Anchors (Qty. 2) 8-Port Managed Gigabit Switch with 802.
Network Topology Requirements • A DHCP-enabled network for the UniFi Switch to obtain an IP address (connected devices will also obtain IP addresses after deployment) • A UniFi Cloud Key or management station running the UniFi Controller software v5.
Hardware Overview Front Panel Ports 1-4 Ports 5-8 Port Description 1-4 RJ45 ports support 10/100/1000 Ethernet connections. 5-8 RJ45 ports support 10/100/1000 Ethernet connections and auto-sensing 802.3af PoE. Back Panel Ground Power Reset Button Port Description Ground Optional ancillary grounding point. Power Connect the included Power Adapter to the Power port. Reset Button This button serves two functions for the UniFi Switch: • Restart Press and release the Reset button quickly.
LEDs System System LED State Status Flashing White Initializing. Steady White Factory defaults, waiting for integration. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. Steady Blue Successfully integrated into a network and working properly. Flashing Blue This is used to locate a device. When you click Locate in the UniFi Controller software, the System LED will flash blue.
RJ45 LEDs PoE Link/Speed/Activity LED State Status Off PoE Off Amber PoE On (IEEE 802.
Side Panels Ventilation Holes WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. WARNING: The US-8-60W must not be stacked. Do not place it on top of another switch. Do not place anything on top of the US-8-60W.
Hardware Installation The UniFi Switch can be mounted on a vertical surface or placed on a desktop. Follow the Wall Mounting instructions to mount the switch using the included screws and anchors. WARNING: To reduce the risk of fire or electric shock, do not expose the switch to rain or moisture. Wall Mounting 1. Drill two 6 mm holes set 73.5 mm apart. 73.5 mm 2. Insert a Screw Anchor into each hole, and fasten a Screw into each anchor. 3.
4. Mount the UniFi Switch by inserting the screw heads into the mounting slots on the bottom of the switch. Then slide the switch down to lock it in place.
Grounding (Recommended) The UniFi Switch is grounded through the Power Adapter; however, you can enhance ESD protection by connecting the ancillary ground. 1. Loosen the ground screw and secure a ground wire (not included) to the grounding point. 2. Secure the other end of the ground wire to a grounding block or other grounded structure.
Connecting Power 1. Connect the Power Adapter to the Power port on the back of the UniFi Switch. 2. Connect the Power Cord to the Power Adapter. Connect the other end of the Power Cord to a power outlet.
Connecting Ethernet 1. Connect an Ethernet cable from your DHCP server or LAN to any port on the UniFi Switch. 1 2 3 PoE 4 OU T 5 6 7 8 2. Connect your 802.3af PoE devices to ports 5-8, and PoE will automatically be activated.
Software Installation Download and install the latest version of the UniFi Controller software at www.ubnt.com/download/unifi and follow the on‑screen instructions. Note: If you already have UniFi Controller v5.3.x or newer installed, skip to the section, Adopting the UniFi Switch. After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the admin name and password that you created and click Sign In.
Adopting the UniFi Switch 1. From the UniFi Controller dashboard, click Devices in the left menu bar. 2. On the Devices screen, locate the UniFi Switch in the list of devices under the Model column. To adopt the UniFi Switch, click Adopt. 3. The System LED on the UniFi Switch will turn blue to confirm that it has been successfully adopted.
Specifications UniFi Switch US-8-60W Dimensions Weight Networking Interfaces PoE Interfaces Power Method Power Supply Max. Power Consumption Max. PoE Wattage per Port PoE Output (Ports 5 to 8) Line Rate 148 x 99.5 x 30.7 mm (5.83 x 3.92 x 1.21") 432 g (15.24 oz) (8) 10/100/1000 Mbps RJ45 Ports (4) Ports 5, 6, 7, 8: IEEE 802.3af 48VDC, Max. 2A External AC/DC Adapter: 48V, 1.25A 12W (Excluding PoE Output) 15.4W IEEE 802.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING: Do not use this product in location that can be submerged by water.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
ISED Canada CAN ICES-3(A)/NMB-3(A) This Class A digital apparatus complies with Canadian CAN ICES-003. CAN ICES-3(A)/NMB-3(A) Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Deutsch Die Europäische Richtlinie 2012/19/EU verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte.
Italiano La direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici.
Français [French] Par la présente UBIQUITI NETWORKS déclare que l’appareil US-8-60W, est conforme aux exigences essentielles et aux autres dispositions pertinentes des directives 2014/30/UE, 2014/35/UE. Le texte complet de la déclaration UE de conformité est disponible à l’adresse internet suivante: www.ubnt.
Slovenščina [Slovenian] Družba UBIQUITI NETWORKS izjavlja, da je naprava US-8-60W v skladu z obveznimi zahtevami in drugimi ustreznimi določbami direktiv 2014/30/EU in 2014/35/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.ubnt.
