User Manual

ManualsBrandsUbiquiti Networks ManualsComputers & AccessoriesUbiquiti UniFi Switch 48 Managed Gigabit Switch with SFP+ (US-48)

UniFi Controller User Guide

Ubiquiti Networks, Inc.

Chapter 9: Insights

Actions Click a button to perform the desired action:

• Edit Click

EDIT

to make changes to the port settings.

For more information, see “UniFi Switch Details” on

page 93.

• Clear Counters Click

CLEAR COUNTERS

to clear the port

statistics.

• Power Cycle If applicable, click

POWER CYCLE

to power

cycle the port.

Port Forward Stats

You can apply one of the following primary filters:

• All Displays all port forwarding entries.

• User-Defined Displays the user-defined port

forwarding entries.

• UPnP Displays the UPnP port forwarding entries.

Customize Columns Click to customize the columns

used for display.

Select Customize columns.

You can add or remove columns for display.

• Reset columns to Click the drop-down at the bottom

of the Customize columns screen to display the Reset

columns to ... options.

- All The Name, From, Protocol, Port, Forward IP,

Forward Port, Packets, Bytes, and Actions columns are

displayed.

- User Defined The Name, From, Protocol, Port, Forward

IP, Forward Port, Packets, Bytes, and Actions columns

are displayed.

- UPnP The Name, Protocol, Port, Forward IP, Forward

Port, Packets, Bytes, and Lease Duration columns are

displayed.

All

Name Displays the name of the port forwarding entry.

From Displays the source IP address, if specified, or

Anywhere.

Protocol Displays the protocol that will be forwarded.

Port Displays the port or ports that will be forwarded to

the LAN. Also known as the external port(s).

Forward IP Displays the destination IP address that will

receive the forwarded port traffic.

Forward Port Displays the destination port or ports that

will receive the forwarded port traffic. Also known as the

internal port(s).

Packets Displays the number of packets transferred.

Bytes Displays the number of bytes transferred.

Actions Click a button to perform the desired action:

• Edit Click

EDIT

to make changes to the UniFi Security

Gateway settings. For more information, see “UniFi

Security Gateway Details” on page 85.