User Manual

2
Chapter 1: Software Installation UniFi Controller User Guide
Ubiquiti Networks, Inc.
on page 2.
PC Users
1. Launch UniFi-installer.exe.
2. Click Install.
3. If your computer doesn’t have Java 1.6 or above
installed, you will be prompted to install it. Click Install
to continue.
4. Click Next.
5. Ensure that the Start UniFi Controller after installation
option is checked and click Finish.
Note: The UniFi Controller software can also be
launched from Start > All Programs.
Configuring the UniFi Controller Software
1. The UniFi Controller software startup will begin. Click
Launch a Browser to Manage Wireless Network.
Note: The above applies to Windows and OS X only.
On Linux, open a browser and go to the following
URL: https://<IP_address_of_controller>:8443
2. Select your country and time zone. Alternatively, you
can click restore from a previous backup to use a file
that contains your backup settings. Click Next.
Note: Enable Auto Back is on by default. Toggle off
if you wish to disable.
Note: U.S. product versions are locked to the U.S.
Country Code to ensure compliance with FCC
regulations.
3. Select the devices that you want to configure and
clickNext. You can click Refresh Now to have the UniFi
Controller repeat its device discovery process.