User Manual

147
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Appendix D: UniFi EDU MobileApp
Appendix D: UniFi EDU
MobileApp
Overview
You can use the UAP-AC-EDU to broadcast
announcements with clarity from your mobiledevice.
Use the UniFi EDU app to broadcast announcements from
the UAP-AC-EDU.
Requirements
• UniFi Controller software v4.9.5 or higher
• UAP-AC-EDU firmware v3.4.18 or higher
• A compatible Android or iOS device located on the same
Layer-2 network as the UniFi Controller and UniFi APs
The following instructions describe the iOS version of the
app; however, the Android version is similar.
1. Download the UniFi EDU app from the AppStore (iOS)
or Google Play (Android).
2. Launch the app.
3. Enter the following information:
• (IP address) Enter the IP address of the UniFi
Controller.
• (port) Enter the appropriate port number, which is
typically 8443.
Note: If you do not know the IP address, you can
click Find to detect a UniFi Controller and then
select it.
• (username) Enter your username for the UniFi
Controller.
• (password) Enter your password for the UniFi
Controller.
• Remember username and password Tap this
option if you want the app to remember your
username and password.
Tap Connect.
The UniFi EDU app includes five tabs:
• Broadcast (see below)
• “Schedule” on page 137
• “Recordings” on page 150
• “Volume” on page 151
• “Settings” on page 151
Broadcast
You can organize the UniFi AC EDU APs into multiple
broadcast groups.
To create a broadcast group, follow these instructions:
1. Click .
2. Enter a descriptive name in the Group Name field.
3. Tap the appropriate UniFi AC EDU APs.
4. Tap Save to apply your changes, or tap Cancel to
discard your changes.