User Manual

133
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Appendix C: UniFi Mobile App
Appendix C: UniFi Mobile App
Overview
The UniFi app has two general functions:
• You can use a mobile device to provision a UniFi AP
for basic functionality without configuring a UniFi
Controller. Go to the Basic Setup section below.
• You can use a mobile device to access the UniFi
Controller. Go to “Controller Mode” on page 136.
Basic Setup
You can set up any UniFi AP.
Requirements
• An Ethernet connection from the UniFi AP to the LAN
with DHCP
• Firmware version 3.4.4.3231 or higher
• A compatible Android or iOS device
The following instructions describe the iOS version of the
app; however, the Android version is similar.
1. Download the UniFi App from the AppStore (iOS) or
Google Play
™
(Android).
2. Select the functionality you want to use:
• Controller mode Use the app to access the UniFi
Controller. Go to “Controller Mode” on page 136.
• I don’t have a controller Use the app to manually
provision a UniFi device for basic functionality
without configuring a UniFi Controller. Go to step 3.
3. Launch the app, and use one of the following options:
• Log In Enter the Username and Password of your
Ubiquiti Single Sign-On (SSO) account. Tap Log In.
• Register To register for an SSO account, tap
Register.
• Continue If you do not want to back up or restore
configurations, you can skip the login and tap
Continue.
4. The app will search for new devices. Tap the UniFi AP
on the device list and go to step 8.
5. If a new device is not detected, tap .
6. Tap Scan QR Code.