User Guide

ManualsBrandsUbiquiti Networks ManualsComputers & AccessoriesUbiquiti UniFi Switch 48 Managed Gigabit Switch with SFP+ (US-48)

1

2

3

4

5

6

7

8

9

Back Panel Ports

Model US-24

DC Input

Console

Power

Model US-48

Console

PowerDC Input

Port Description

Console RJ45 serial console port for Command Line

Interface (CLI) management. Use an RJ45-to-DB9,

serial console cable, also known as a rollover

cable, to connect the Console port to your

computer. Then configure the following settings

as needed:

• Baud rate 115200

• Data bits 8

• Parity NONE

• Stop bits 1

• Flow control NONE

DC Input The 25VDC input can connect a redundant or

stand-alone DC power source (not included) with

minimum power: 25W (US-24) or 56W (US-48), 25

to 16V, and 2.5 mm DC power inline connector.

Note: You can use the redundant DC

power source as a hot spare; if the internal

AC/DC power supply no longer provides

power, then the EdgeSwitch Lite will

switch to the DC power source without

interrupting its operation.

Power Connect the included Power Cord to the

Powerport.