User Manual

80
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 9: Insights
PoE
Port The ports display their status and port number:
Indicates a 10/100 Mbps connection.
Indicates a 1 Gbps (1000 Mbps) connection.
Indicates a 10 Gbps connection.
Indicates 1 Gbps (1000 Mbps) connection with PoE.
Indicates the connection is disabled (no network or
VLAN is enabled).
Indicates no connection (the network or VLAN is
enabled, but the port is not in use).
Switch If All Switches is selected, then this displays the
hostname, alias, or MAC address of the UniFi Switch. You
can click the name to get additional details. For more
information, see “UniFi Switch Details” on page 93.
Name Displays the name of the port.
PoE Displays the PoE setting:
• (blank) PoE is disabled.
• 24V Passive 24V passive PoE is enabled.
• PoE+ 802.3at/af devices can be plugged in and
automatically receive PoE.
• __W Power output is displayed in watts.
PoE Detection Displays the PoE status:
• (blank) PoE is disabled.
• Not detected No 802.3at/af device is detected.
• Passive 24V passive PoE is enabled.
• Good An 802.3at/af device is plugged in and
automatically receiving PoE.
PD Class Displays the PD (Powered Device) class of the
detected device, if applicable; this indicates its power
requirements.
Power Displays the power output in watts, if applicable.
Voltage Displays the voltage output, if applicable.
Current Displays the current output in amperes, if
applicable.
Actions Click a button to perform the desired action:
• Edit Click
EDIT
to make changes to the port settings.
For more information, see “UniFi Switch Details” on
page 93.
• Clear Counters Click
CLEAR COUNTERS
to clear the port
statistics.
• Power Cycle If applicable, click
POWER CYCLE
to power
cycle the port.
Counters
Port The ports display their status and port number:
Indicates a 10/100 Mbps connection.
Indicates a 1 Gbps (1000 Mbps) connection.
Indicates a 10 Gbps connection.
Indicates 1 Gbps (1000 Mbps) connection with PoE.
Indicates the connection is disabled (no network or
VLAN is enabled).
Indicates no connection (the network or VLAN is
enabled, but the port is not in use).
Switch If All Switches is selected, then this displays the
hostname, alias, or MAC address of the UniFi Switch. You
can click the name to get additional details. For more
information, see “UniFi Switch Details” on page 93.
TX Bytes Displays the number of bytes transmitted.
TX Frames Displays the number of frames transmitted.
TX Multicast Displays the number of multicast packets
transmitted.
TX Broadcast Displays the number of broadcast packets
transmitted.
TX Errors Displays the number of error packets
transmitted.
RX Bytes Displays the number of bytes received.
RX Frames Displays the number of frames received.
RX Multicast Displays the number of multicast packets
received.
RX Broadcast Displays the number of broadcast packets
received.
RX Errors Displays the number of error packets received.