User Manual

69
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 7: Clients
Wireless
Frequency band If the Wireless filter is applied, then the
Frequency band filter is available:
• All Displays all wireless clients.
• 2G Only displays 2.4 GHz clients.
• 5G Only displays 5 GHz clients.
AP Select the AP whose clients you want displayed. Each
option in the drop-down list also indicates the number of
wireless clients in parentheses.
(icon) Displays the icon corresponding to a wireless client:
wireless user
wireless guest
Name Displays the hostname, alias, or MAC address of the
connected client. You can click the name to get additional
details; refer to “Client Details” on page 117 for more
information.
IP Address Displays the IP address used by the client.
WLAN Displays the name of the wireless network.
AP/Port Displays the name of the connected AP. You
can click the name to get additional details; refer to
“UniFi Access Point Details” on page 103 for more
information.
Activity Displays the relative level of activity for each
client.
Down Displays the total amount of data downloaded by
the client.
Up Displays the total amount of data uploaded by
theclient.
Uptime Displays the amount of time the client has been
connected for this session.
Actions Click a button to perform the desired action:
• Block Click
BLOCK
to block this client from accessing
the network. Click
UNBLOCK
to unblock this client.
• Reconnect Click
RECONNECT
to reconnect a wireless
client. You can click
RECONNECT
to kick out a client,
which usually reconnects back quickly; this is useful for
troubleshooting or resolving a problematic wireless
connection.
• Unauthorize/Authorize (Available for Guests only.)
Click
UNAUTHORIZE
to remove authorization of guest access
and disconnect the guest, or click
AUTHORIZE
for guests
pending authorization.
Wired
Network If the Wired filter is applied, then the Network
filter is available. Each option in the drop-down list also
indicates the number of wired clients in parentheses.
• All Displays all wired clients.
• (name) Select the network whose clients you want
displayed.
(icon) Displays the icon corresponding to a wired client:
wired user
wired guest
Name Displays the hostname, alias, or MAC address of the
connected client. You can click the name to get additional
details; refer to “Client Details” on page 117 for more
information.
IP Address Displays the IP address used by the client.
Network Indicates which local network is used.
AP/Port Displays the name of the network device and
port number used by the client. You can click the name to
get additional details; refer to “UniFi Switch Details” on
page 93 for more information.
Activity Displays the relative level of activity for each
client.
Down Displays the total amount of data downloaded by
the client.
Up Displays the total amount of data uploaded by
theclient.
Uptime Displays the amount of time the client has been
connected for this session.
Actions Click a button to perform the desired action:
• Block Click
BLOCK
to block this client from accessing
the network. Click
UNBLOCK
to unblock this client.
• Unauthorize/Authorize (Available for Guests only.)
Click
UNAUTHORIZE
to remove authorization of guest access
and disconnect the guest, or click
AUTHORIZE
for guests
pending authorization.