User Manual

59
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 6: Devices
Chapter 6: Devices
The Devices screen displays a list of UniFi devices
discovered by the UniFi Controller. You can click any of the
column headers to change the listorder.
You can apply one of the following primary filters:
• All Displays all UniFi devices.
• Gateway/Switches Displays all UniFi Security Gateways
and Switches.
• APs Displays all UniFi APs.
• Phones Displays all UniFi VoIP Phones.
If the APs filter is applied, then another filter is available:
• Overview Displays the number of clients, amount
of data downloaded, amount of data uploaded, and
channel setting.
• Performance Displays the number of 2.4 GHz and
5GHz clients, overall transmit rate, overall receive rate,
transmit rates in the 2.4 GHz and 5GHz radio bands, and
channel setting.
• Config Displays the WLAN and radio settings for the
2.4GHz and 5 GHz radio bands.
Items per page Select how many results are displayed
per page: 10, 25, 50, or 100.
If there is more than one page of entries to display, click
the navigation controls or page numbers at the bottom
right of the screen to display different pages.
Search Enter the text you want to search
for. Simply begin typing; there is no need to press Enter.
(sort) You can click any column to sort the displayed list.
The selected column displays or to indicate ascending
or descending order.
The icon column sorts by state, and for connected devices
it also sorts by device type. This is the order:
• Connected Gateway
• Connected Switch
• Connected AP
• Connected Phone
• Any device that is being upgraded or provisioned
• Any device that is being adopted or is restarting
• Any device that is pending
• Any device that is disconnected or in an error state
After this sorting is applied, the sort order uses
alphabetical order according to the device name.
Customize Columns Each primary filter: All,
Gateway/Switches, APs, or Phones applies a default set of
columns to display. If you enable the Customize Columns
option, then the primary filter no longer changes the
columns.