User Manual

57
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 5: Map
Configure Maps Click to add maps or edit
the current map(s).
The left side of the map offers the following options:
Zoom Slider Use to zoom the map detail in and
out.
Devices Click to toggle the size of devices and
their labels between normal (default) and large.
Unplaced Devices Drag each device icon from the
Unplaced Devices list to the appropriate location on
themap.
Set Map Scale Use this option to define the scale
of the map. You will draw a line and define the
distance that the line represents.
Setting the Map Scale
1. Click the set map scale button.
2. Click and hold to draw a line in the area that you want
to use to set the scale of the map. If you need to redraw
the line, just click and hold again to draw a new line.
3. Enter the distance that the line represents in the
Distance field. By default, the distance is specified in
meters but you can switch to feet using the drop-down
menu on the right. Click Set Scale.
The legend at the bottom of the map shows the new scale
of the map.
System Topology
1. Click
,
and then select Topology from the
drop-down menu.
2. The UniFi Controller displays a topology diagram of
your UniFi system.
The default view shows the entire topology tree,
except for client devices. Click any node to collapse the
branches below (to the right of) that node. Clicking the
root node collapses the entire tree.
3. Click Show Clients to display client devices.