User Manual

56
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 5: Map
Device Options
Click a UniFi icon to reveal options. Click the UniFi icon
again to hide them.
Lock Lock the device icon to its current location.
Details Display the Details screen. For more
information, go to the appropriate chapter:
• “UniFi Security Gateway Details” on page 85
• “UniFi Switch Details” on page 93
• “UniFi Access Point Details” on page 103
• “UniFi VoIP Phone Details” on page 115
Statistics (Available for the UAP-AC-LITE,
UAP-AC-LR, UAP-AC-PRO, and UAP-AC-EDU only.)
Displays the RF Environment screen. For more
information, go to “RF Environment” on page
106.
Remove Remove the device icon from its location.
Map Display Options
(Map) If multiple maps have been uploaded, you can
select which map you want to by using the Search box.
There is no need to press Enter, simply start typing.
You can apply one of the following filters:
• 2G Devices Displays the 2.4 GHz devices.
• 5G Devices Displays the 5 GHz devices.
Each device is displayed with its name. If no custom label
is applied, the device’s MAC address will be displayed.
To change a name applied to a device, refer to Alias in the
appropriate section:
• “UniFi Security Gateway – Configuration” on page
87
• “UniFi Switch – Configuration” on page 98
• “UniFi Access Point – Configuration” on page 108
You can apply one of the following display options:
• Labels (None/Simple/Detailed)
• Coverage
• Topology
Labels Click this button to cycle between the following
options for label display:
• None Do not display device labels.
• Simple Display simple device labels containing the
device name only.
• Detailed Display detailed device labels containing
the following information: device name, MAC address,
transmit/receive channel(s), number of users connected,
and number of guests connected.
Coverage Displays a visual representation of the wireless
range covered by any APs.
You can apply one of the following filters:
• 2G Coverage Displays the coverage by 2.4 GHz devices.
• 5G Coverage Displays the coverage by 5 GHz devices.
- __ dBm You can change the receiver sensitivity value
for more accurate coverage results. The default is
-90dBm.
Topology Displays a visual representation of the network
configuration and connections between any APs. A
dashed line will indicate the wirelessly connected AP and
its uplink to a wired AP, even if the wirelessly connected
AP is isolated.