User Manual

49
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 4: Dashboard
• Guests Displays the number of clients connected to the
guest wired network.
• Switches Displays the number of UniFi Switches
managed on this site.
• Down Displays the download rate of the wired
network(s).
• Up Displays the upload rate of the wired network(s).
WLAN
The basic details of the wireless network(s) are displayed.
The monitor is color-coded to indicate status:
Green The wireless network is active.
Red The wireless network is inactive.
Active Devices Displays the number of APs adopted and
active.
Inactive Displays the number of APs adopted but not
active.
Pending Displays the number of APs pending adoption.
Status information Place your mouse over the monitor
to display the following:
• Users Displays the number of clients connected to the
primary wireless network(s).
• Guests Displays the number of clients connected to the
guest wireless network(s).
• APs Displays the number of APs managed on this site.
• Down Displays the download rate of the wireless
network(s).
• Up Displays the upload rate of the wireless network(s).
Download Throughput & Latency
The historical chart displays the download traffic in terms
of throughput and latency over a 24-hour period.
Note: A UniFi Security Gateway must be active to
enable this chart.
Avg/Max Throughput Average throughput is displayed
as a dark gray bar. Maximum throughput is displayed as a
light gray bar.
Latency Latency is displayed as a blue line.
Status information Place your mouse over a specific
point to display the following about a date and time:
• Avg/Max Throughput Displays the average and
maximum throughput values.
• Latency Displays the latency value.
Upload Throughput & Latency
The historical chart displays the upload traffic in terms of
throughput and latency over a 24-hour period.
Note: A UniFi Security Gateway must be active to
enable this chart.
Avg/Max Throughput Average throughput is displayed
as a dark gray bar. Maximum throughput is displayed as a
light gray bar.
Latency Latency is displayed as a blue line.
Status information Place your mouse over a specific
point to display the following about a date and time:
• Avg/Max Throughput Displays the average and
maximum throughput values.
• Latency Displays the latency value.