User Manual

48
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 4: Dashboard
Speed Test Click the monitor to run the Speed Test.
After the Speed Test is complete, the following will be
displayed:
• Latency, duration of the average Ping round-trip time
• Download speed
• Upload speed
• Run Speed Test Click to run the test again.
• Close Click to exit the Speed Test.
WAN
The basic details of the UniFi Security Gateway are
displayed.
The monitor is color-coded to indicate status:
Green The WAN connection is active.
Red The WAN connection is inactive.
Active Devices Displays the number of Gateway devices
adopted and active.
Inactive Displays the number of Gateway devices
adopted but not active.
Pending Displays the number of Gateway devices
pending adoption.
Status information Place your mouse over the monitor
to display the following:
• WAN IP Displays the IP address of the WAN interface.
• Subnet Mask Displays the subnet mask of the WAN
interface.
• Gateway Displays the Internet IP address of the UniFi
Security Gateway.
• DNS Displays the IP addresses of the Domain Name
System (DNS) servers.
• Clients Displays the total number of local clients.
• Up Displays the upload rate of your Internet
connection.
• Down Displays the download rate of your Internet
connection.
LAN
The basic details of the wired network(s) are displayed.
The monitor is color-coded to indicate status:
Green The wired network is active.
Red The wired network is inactive.
Active Devices Displays the number of wired devices
adopted and active.
Inactive Displays the number of wired devices adopted
but not active.
Pending Displays the number of wired devices pending
adoption.
Status information Place your mouse over the monitor
to display the following:
• LAN IP Displays the local IP address of the UniFi
Security Gateway.
• Users Displays the number of clients connected to the
wired network.