User Manual

23
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 3: Using the UniFi Controller Software
• Key Index Specify which Index of the WEP Key
to use. Four different WEP keys can be configured
at the same time, but only one is used. Select the
effective key: 1, 2, 3, or 4.
- WPA-Personal WPA or Wi-Fi Protected Access was
developed as an encryption method stronger than
WEP. WPA-Personal requires a passphrase to connect
to the wireless network.
• Security Key Enter the passphrase that users will
use to connect to the wireless network.
- WPA-Enterprise WPA Enterprise uses a RADIUS
server to authenticate users on the wireless network.
• RADIUS Profile Specify a RADIUS profile:
• Select a RADIUS profile from the drop-down list,
or
• Click
CREATE NEW RADIUS PROFILE
to create a new RADIUS
profile. Refer to “Create New RADIUS Profile” on
page 39 for detailed information.
• Hotspot 2.0 Select this option to enable Hotspot
2.0. Then select a Hotspot profile from the drop-
down list.
• Guest Policy Select this option to enable guest access
policies on this wireless network.
Advanced Options
Click to display options for advanced users.
• VLAN To use a VLAN, select Use VLAN ID and enter the
VLAN ID number. If you enable WPA Enterprise, you have
another option:
- Enable RADIUS assigned VLAN (beta) Select this
option to allow the RADIUS server to dynamically
assign a VLAN to a wireless client.
If you set a VLAN ID as a static value for another SSID
on the same AP, then you cannot re-use the same
VLAN ID for the RADIUS-assigned (dynamic) VLAN. For
example, if you have a VLAN set to VLAN 10, then you
cannot use VLAN ID 10 for RADIUS-controlled VLAN
users as those users will not be assigned an IP address.
• Hide SSID Select this option if you don’t want the
wireless network name or SSID to be broadcast.
• WPA Mode (Available if WPA security is enabled.) Select
the appropriate WPA method: Both, WPA1 Only, or
WPA2 Only (default).
• Encryption Select the appropriate encryption method:
Auto, TKIP Only, or AES/CCMPOnly (default).
• User Group Assign wireless users to a specific user
group. For more information about user groups, see
“Settings > User Groups” on page 40.
• UAPSD Disabled by default. Unscheduled Automatic
Power Save Delivery. Select this option to enable the
power save mode of Wi-Fi devices.
• Scheduled Select Enable WLAN Schedule to restrict
wireless access to the schedule you set.
- Monday-Sunday Select the days you want to
schedule.
- Hours Use the sliders to select the start and end
times of the day’s wireless access.
• Save Click to apply changes.
• Cancel Click to discard changes.
Settings > Hotspot 2.0 (Beta)
Use this option to create Hotspot 2.0 profiles for each site.
Hotspot 2.0 Profile Name Displays the name of the
Hotspot 2.0 profile.
Actions Click a button to perform the desired action:
• Edit Click
EDIT
to make changes to the profile. Go to
“Create or Edit a Hotspot 2.0 Profile” on page 24.
• Delete Click to delete the profile.
Add New Hotspot 2.0 Profile Click
ADD NEW HOTSPOT 2.0 PROFILE
to create a new Hotspot 2.0 profile. Go to “Create or Edit
a Hotspot 2.0 Profile” on page 24.