User Manual

141
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Appendix C: UniFi Mobile App
Actions
You can locate or restart the device.
• Locate Tap to flash the LED on the device. The LED will
flash until Locate is tapped again.
• Restart Tap to restart the selected device.
Configure
• Alias Also known as the host name. Enter or edit the
customizable name or identifier of the device.
• Radios These settings are available only for APs.
‑ Channel Select the appropriate channel number and
channel width.
Note: If the AP is part of a Zero Handoff WLAN
Group, then the Channel setting cannot be
changed.
‑ TX Power Select the appropriate transmit power
value. The default is Auto.
‑ Min. RSSI Disabled by default. Select this option
and enter a minimum threshold (we recommend a
value in this range: -70 to -90 dBm). For UniFi, RSSI
is synonymous with SNR. If the client signal falls
below the specified threshold, then the AP kicks
out the client, allowing it to reconnect with a more
suitableAP.
Note: If the AP is part of a Zero Handoff WLAN
Group, the Minimum RSSI setting cannot be
changed.