User Manual

137
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Appendix C: UniFi Mobile App
3. Enter the following information:
• (IP address) Enter the IP address of the UniFi
Controller.
• (port) Enter the appropriate port number, which is
typically 8443.
Note: If you do not know the IP address, you can
tap Find to detect a UniFi Controller and then
select it.
• (username) Enter your username for the UniFi
Controller.
• (password) Enter your password for the UniFi
Controller.
• Remember username and password Tap this
option if you want the app to remember your
username and password.
Tap Connect.
4. You may be prompted to enter a descriptive name for
the Controller if it is currently using an IP address. You
can change it now and then tap OK, or you can tap Not
Now to skip this step.
The UniFi app includes four tabs:
• “Dashboard” on page 137
• “Devices” on page 138
• “Clients” on page 143
• “Settings” on page 145
Dashboard
The Dashboard screen provides an overview of your
network’s status.
WAN
(status) Displays one of the following:
• OK The node is active.
• Unknown There is no UniFi Security Gateway.
• Warning There is a warning; please investigate further.
• Error There is an error; please investigate further.
Inactive Displays the number of Gateway devices
adopted but not active.
Pending Displays the number of Gateway devices
pending adoption.
LAN
(status) Displays one of the following:
• OK The node is active.
• Unknown There is no UniFi Switch.
• Warning There is a warning; please investigate further.
• Error There is an error; please investigate further.
Inactive Displays the number of wired devices adopted
but not active.
Pending Displays the number of wired devices pending
adoption.
WLAN
(status) Displays one of the following:
• OK The node is active.
• Unknown There is no UniFi AP.
• Warning There is a warning; please investigate further.
• Error There is an error; please investigate further.