User Manual

134
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Appendix C: UniFi Mobile App
7. Scan the QR code on the back of the UniFi AP, or tap
Enter ID Manually to type the case‑sensitive MAC
address.
Note: For Android, the mobile device
automatically connects to the helper SSID. For
iOS, manually copy and paste the helper SSID
and password.
8. You may be prompted to upgrade the UniFi AP to the
latest firmware. Please proceed with the upgrade.
Go to the Device section below to set up the UniFi AP.
Device
The Device screen displays basic status information:
Configure To manage the device, go to the Configure
section in the next column.
Overview
IP Address Displays the IP address of the device.
MAC Address Displays the MAC address or unique
hardware identifier of the device.
Firmware Version Displays the version number of the
device’s firmware.
Radio 2G
Channel Displays the channel used.
Transmit Power Displays the level of transmit power.
Connected Clients Displays the number of clients
connected to this UniFi AP.
SSID Displays the wireless network name.
Encryption Displays Encrypted.
Traffic In/Out Displays the amount of upload and
download traffic.
Clients
Connected Clients Displays the number of clients
connected to this UniFi AP. Tap to display additional
details:
• Uptime Displays the duration of time the device has
been running without interruption.
• Traffic Displays the total amount of data downloaded
and uploaded by the client.
• RSSI Displays the SNR of the connection.
• Block this client Tap to block this client from accessing
the network.
Blocked Clients Displays the number of blocked clients.
Tap to display a list of blocked clients.
• Unblock this client Tap to allow this client access to the
network.