User Manual

Chapter 2: UniFi Cloud UniFi Controller User Guide

Ubiquiti Networks, Inc.

8. Create the super admin for your UniFi Controller.

Perform the following steps:

a. Enter an admin name in the Admin Name field.

b. Enter an email address in the Admin Email field.

c. Enter a password in the Password field to use when

accessing the management interface as a super

admin.

d. Confirm your password in the Confirm Password

field.

e. Click Next.

Note: Only the super admin –not any site admin–

can view devices that are Pending Approval and

then adopt them on the UniFi Controller. Ensure

that you save the super admin login information for

futureuse.

9. Enter your Ubiquiti account email/username and

password to enable to Cloud Access. Alternatively, you

can click register now, to create a Ubiquiti account.

Click Next.

10. Review your settings. Click Finish to save your settings

or click Back to make changes. Once the wizard

is finished, the browser will be redirected to the

management interface.

Congratulations, your wireless network is now configured.

A login screen will appear for the UniFi Controller

management interface. Enter the admin name and

password that you created and click Login.

Proceed to “Using the UniFi Controller Software” on

page 17 for information on using the UniFi Controller

software.

Note: A future feature will enable backup of the

UniFi Controller database and configuration on the

included microSD card.

UniFi Cloud Key Configuration

1. Ensure that your host system is on the same Layer-2

network as the UniFi CloudKey.

2. The UniFi Cloud Key is set to DHCP by default, so it

will try to automatically obtain an IP address. Assign a

specific IP address to the UniFi Cloud Key, or check the

DHCP server for its IP address.

Note: The default fallback IP address of the UniFi

Cloud Key is 192.168.1.30.