User Manual

114
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 12: UniFi Access Point Details
Access Point - Managed by Other
The Managed by Other state indicates that the AP is not
in the default state but it is not controlled by the UniFi
Controller.
Overview
MAC Address Displays the MAC address of the AP.
Model Displays the model number.
Version Displays the version of software used on the AP.
Last Seen Displays the amount of time that has passed
since the Access Point was last seen.
Adopt
IP Address Displays the IP address of the AP.
Port Displays SSH port of the AP.
Username Enter the SSH Username for management
access. This is the Device Username you configured in
“Settings > Site” on page 20.
Password Enter the SSH Password for management
access. This is the Device Password you configured in
“Settings > Site” on page 20.
Inform URL This tells the AP where to look for the UniFi
Controller. The URL will be automatically displayed but
you may need to verify its accuracy as the system may
have multiple interfaces.
Adopt Click Adopt to adopt the AP so you can manage it
using the UniFi Controller software.
Cancel Click Cancel to discard changes.
Access Point - Pending Approval
The Pending Approval state indicates that the Access Point
is in the default state and is available for adoption.
MAC Address Displays the MAC address of the AP.
Model Displays the model number.
Version Displays the version of software used on the AP.
Last Seen Displays the amount of time that has passed
since the AP was last seen.
If you want to manage this AP using the UniFi Controller
software, then click Adopt on the Devices screen.