User Manual

112
UniFi Controller User Guide
Ubiquiti Networks, Inc.
Chapter 12: UniFi Access Point Details
Cancel Click Cancel to discard changes.
Pending Changes If you want queue changes for
multiple devices and then apply them later, the Pending
Changes option appears in the Properties panel. Click
to display the devices.
• Apply Click
APPLY
to save changes.
• Discard Click
DISCARD
to cancel changes.
Airtime Fairness
Note: Only the UAP-AC-LITE, UAP-AC-LR,
UAP-AC-PRO, and UAP-AC-EDU models support
airtime fairness.
The Airtime Fairness option helps multiple users to share
the bandwidth of a single AP.
On/Off Disabled by default. Select On to enable this
option.
Queue Changes Click Queue Changes to line up the
changes to take effect. This allows you to make multiple
changes to the device and then apply them all at once
so that the device doesn’t have to re-provision over and
over again when you change different sections of the
configuration. Each section with pending changes is
highlighted by an ellipsis.
When you are done with your changes, click Apply
Changes at the bottom of the screen. (You can cancel the
changes of any section by clicking X of the appropriate
section.)
Cancel Click Cancel to discard changes.
Pending Changes If you want queue changes for
multiple devices and then apply them later, the Pending
Changes option appears in the Properties panel. Click
to display the devices.
• Apply Click
APPLY
to save changes.
• Discard Click
DISCARD
to cancel changes.
Custom Upgrade
For firmware upgrades, the UniFi devices retrieve the latest
firmware from the Ubiquiti website. To specify firmware
saved in a custom location, select this option.
(location URL) Enter the UL of the firmware’s location.
Custom Upgrade Click to upgrade the
firmware from the location you entered.
Forget This AP