User Guide

Configuring PoE Settings
The PoE settings for ports 1-24 are set to auto-sensing PoE+.
PoE will automatically be activated on the port when an
802.3af/at device is connected. For 24V passive PoE, PoE must
be manually activated.
WARNING: Before activating 24V passive PoE, ensure
that the connected device supports PoE and the
suppliedvoltage.
1. On the Devices screen, locate the UniFi Switch in the list of
devices under the Model column. Click the switch to access
its settings.
2. Click the Ports tab.