User Guide

Connecting SFP+
1. Remove the protective plug covering the SFP+ port.
2. Plug a compatible fiber module into the SFP+ port.
1000Mbps SM/SC 20KM DDM
Tx1550nm/Rx1310nm
3. Connect the fiber optic cable to the fiber module. Then
connect the other end of the cable to another fiber device.
4. Repeat steps 1-3 to connect additional SFP+ ports.
Note: Use compatible fiber SFP+ modules with the
appropriate fiber optic cabling. For information about
compatible fiber SFP+ modules, visit:
community.ubnt.com/unifi