User Manual

Ports
Main/48V
Ethernet Port
Secondary
Ethernet Port
Reset Button
Cable Feed Plug
Main/48V This Gigabit Ethernet port is used to connect the
power and should be connected to the LAN and DHCP server.
Power can be provided by any of the following:
• Included PoE GigE Adapter
• 48V, 802.3af compliant switch
• Ubiquiti Networks TOUGHSwitch
™
PRO, model TS‑8‑PRO
• Ubiquiti Networks EdgeRouter
™
PoE, model ERPoe‑5
Secondary This Gigabit Ethernet port is used for bridging.
Reset This button serves two functions for the UniFi AP‑PRO:
• Restart Press and release the Reset button quickly.
• Restore to Factory Default Settings Press and hold the
Reset button for more then five seconds.
Cable Feed Plug If your Ethernet cable feeds along the
mounting surface, remove theCable Feed Plug.
Locking
Clip
Mounting
Bracket
Locking Clip During installation, the Locking Clip on
the Mounting Bracket locks into the Locking Notch on the
UniFiAP-PRO to help prevent theft.