Enterprise WiFi System Models: UAP-PRO
Introduction Thank you for purchasing the Ubiquiti Networks™ UniFi® Enterprise WiFi System. This system includes the UniFi Controller software, which allows you to manage your wireless network using a web browser. The UniFi Controller software is available for download at downloads.ubnt.com/unifi This Quick Start Guide includes the warranty terms and is for use with the UniFi AP‑PRO, model: UAP-PRO.
System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8 • Java Runtime Environment 1.
Hardware Overview LED LED Color Status Flashing White Initializing. Steady White Factory default, waiting to be integrated. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. This is used to locate an AP. Quickly Flashing Blue Steady Blue When you click Locate in the UniFi Controller software, the AP will flash. It will also display the location of the AP on the map.
Ports Reset Button Main/48V Ethernet Port Secondary Ethernet Port Cable Feed Plug Main/48V This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by any of the following: • Included PoE GigE Adapter • 48V, 802.3af compliant switch • Ubiquiti Networks TOUGHSwitch™ PRO, model TS-8-PRO • Ubiquiti Networks EdgeRouter™ PoE, model ERPoe-5 Secondary This Gigabit Ethernet port is used for bridging.
Hardware Installation The UniFi AP-PRO can be mounted to the wall or ceiling. Perform the steps for the appropriate installation: Wall Mount 1. Position the Mounting Bracket at the desired location on the wall with the cable feed slot pointed towards the floor. 2. Use a pencil to mark the three holes on the wall. Use a 6 mm (1/4") drill bit to drill the holes. Top Optional 25 mm (1 in) Hole for Ethernet Cable Feed through Wall 3.
4. Insert the Screw Anchors into the 6 mm (0.24 in) holes. Secure the Mounting Bracket to the wall by inserting the Screws into the anchors. 5. Connect the Ethernet cable to the Main/48V Ethernet port.
6. Align the notch on the UniFi AP-PRO with the notch on the Mounting Bracket. 7. Turn the UniFi AP-PRO clockwise until it locks into place.
Ceiling Mount 1. Remove the ceiling tile. 2. Place the Mounting Bracket in the center of the ceiling tile. Mark the three mounting screw holes and 25 mm (1 in) hole for the Ethernet cable. 25 mm (1 in) Hole for Ethernet Cable Feed 3. Use a 3 mm (1/8") drill bit to drill the screw holes, and cut or drill the 25 mm (1 in) hole for the Ethernet cable feed.
4. Secure the Mounting Bracket to the ceiling tile using the Ceiling Backing Plate, Flathead Screws, and Keps Nuts. Then feed the Ethernet cable through the 25 mm (1 in) hole.
5. Set the ceiling tile back into place. 6. Connect the Ethernet cable to the Main/48V Ethernet port. 7. Align the notch on the UniFi AP-PRO with the notch on the Mounting Bracket. 8. Turn the UniFi AP-PRO clockwise until it locks into place.
Powering the UniFi AP-PRO The UniFi AP-PRO can be powered by the included PoE GigE Adapter or a compatible PoE device. Connecting to the PoE GigE Adapter 1. Connect the other end of the Ethernet cable coming from the Main/48V Ethernet port of the UniFi AP-PRO to the Ethernet port labeled POE on the PoE GigE Adapter. 2. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE GigE Adapter. 3. Connect the power cord to the power port on the PoE GigE Adapter.
Connecting to a PoE Device Connect the other end of the Ethernet cable coming from the Main/48V Ethernet port on the UniFi AP directly to a PoE port on one of the following: • 48V, 802.3af compliant switch • Ubiquiti Networks TOUGHSwitch PRO, model TS-8-PRO • Ubiquiti Networks EdgeRouter PoE, model ERPoe-5 TOUGHSwitch PRO Power Connection Diagram Software Installation Download and install the latest version of the UniFi Controller software at downloads.ubnt.com/unifi and follow the on‑screen instructions.
Specifications UniFi AP PRO Dimensions Weight Mounting Kits Included Networking Interface Buttons Antennas 2.4 GHz 5 GHz Wi-Fi Standards Power Method Power Supply Max. Power Consumption Max. TX Power 2.4 GHz 5 GHz BSSID Power Save Wireless Security Certifications Mounting Operating Temperature Operating Humidity 200 x 200 x 36.5 mm (7.87 x 7.87 x 1.44 in) 298 g (10.51 oz) 358 g (12.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
Industry Canada This Class A digital apparatus complies with Canadian CAN ICES-3(B). To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.
www.ubnt.com ©2012-2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, EdgeRouter, TOUGHSwitch, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
