Quick Start Guide

Connecting Power
Connect the power using one of the following options:
• Using the Micro-USB Power Adapter: Go to Connecting to the
Micro-USB Power Adapter.
• Using an airCube
™
(not included): Go to Connecting to
theairCube.
Note: The airCube provides Wi-Fi connectivity with
PoE passthrough, so it is the ideal complement to
the UF-LOCO for CPE installations.
• Using a PoE switch (not included): Connect the Ethernet
cable from the UF-LOCO to a PoE-enabled Ethernet port on
the switch.
WARNING: The PoE switch must comply with the
power specifications listed in the Specifications section
of this Quick Start Guide.
Connecting to the Micro-USB Power Adapter
1. Connect the Micro-USB Power Adapter to the power port.
2. Plug the Micro-USB Power Adapter into a power outlet.