Quick Start Guide

USP Connect DC Input

Power Port

Reserved for future use.

Connect the included Power Cord to the Power port.

Installation Requirements

Phillips screwdriver

Standard-sized, 19" wide rack with a minimum of 1U height available

For indoor applications, use Category 5 (or above) UTP cabling approved for

indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used

for all wired Ethernet connections and should be grounded through the AC ground

of the power supply.

We recommend that you protect your networks from harmful outdoor

environments and destructive ESD events with industrial-grade, shielded Ethernet

cable from Ubiquiti. For more details, visit: ui.com/toughcable

Note: Although the cabling can be located outdoors, the UDM-Pro itself

should be housed inside a protective enclosure.

Installing an HDD

Ensure the device is powered off before you install the 3.5" or 2.5" HDD (not

included).

UDM-Pro Quick Start Guide