Quick Start Guide

SFP+ Speed/Link/Activity LED (Ports 10 - 11)
HDD Bay
RJ45 LAN (Ports 1 - 8)
RJ45 Internet (Port 9)
SFP+ Internet (Port 10)
SFP+ LAN (Port 11)
Reset Button
USP RPS LED
Flashing Indicates Activity
Off No Link
Green
Link Established at 1 Gbps
Flashing Indicates Activity
White
Link Established at 10 Gbps
Flashing Indicates Activity
Install a 3.5" or 2.5" HDD (not included) to use the device as an NVR for UniFi
Protect.
The RJ45 ports support 10/100/1000 Ethernet connections. By default, they are
set to DHCP Server with the fallback IP address, 192.168.1.1/24.
The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP Client
by default.
The SFP+ port supports a 1/10G Ethernet connection. Set to DHCP Client by
default.
The SFP+ port supports a 1/10G Ethernet connection. By default, it is set to
DHCP Server with the fallback IP address, 192.168.1.1/24.
Resets to factory defaults. The device should be running after bootup is complete.
Press and hold the Reset button for about 10 seconds until the display indicates
that the device has reset itself. After a few seconds, the LED will turn off, and the
device will automatically reboot.
UDM-Pro Quick Start Guide