UDM-Pro Quick Start Guide Package Contents UniFi Dream Machine Pro Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Security Screw 2.5" HDD Screws (Qty. 4) Power Cord Rubber Feet (Qty.
regulation to prevent equipment damage due to stability issues with local UDM-Pro Quick Start Guide AC power. Hardware Overview Touchscreen Display Bootup Animation Initializing. Location Animation This indicates that you clicked Locate in the UniFi Controller software. The software will also display the location of the device on the map.
Flashing Indicates UDM-Pro Quick StartActivity Guide SFP+ Speed/Link/Activity LED (Ports 10 - 11) Off No Link Green White Link Established at 1 Gbps Flashing Indicates Activity Link Established at 10 Gbps Flashing Indicates Activity HDD Bay Install a 3.5" or 2.5" HDD (not included) to use the device as an NVR for UniFi Protect. RJ45 LAN (Ports 1 - 8) The RJ45 ports support 10/100/1000 Ethernet connections. By default, they are set to DHCP Server with the fallback IP address, 192.168.1.1/24.
Reserved for future use. UDM-Pro Quick Start Guide USP Connect DC Input Reserved for future use. Power Port Connect the included Power Cord to the Power port. Installation Requirements Phillips screwdriver Standard-sized, 19" wide rack with a minimum of 1U height available For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
UDM-Pro Quick Start Guide 2. 3.
UDM-Pro Quick Start Guide 4.
UDM-Pro Quick Start Guide OR
UDM-Pro Quick Start Guide 5. 6.
UDM-Pro Quick Start Guide Removing an 3.5" HDD 1. 2.
UDM-Pro Quick Start Guide Hardware Installation 1. 2.
UDM-Pro Quick Start Guide OR
UDM-Pro Quick Start Guide Connecting Power
UDM-Pro Quick Start Guide Connecting to the Internet For information about compatible fiber SFP modules, visit: ubnt.
UDM-Pro Quick Start Guide
UDM-Pro Quick Start Guide Connecting to the LAN 1. 2.
UDM-Pro Quick Start Guide 3. 4.
UDM-Pro Quick Start Guide Configuration You have the following options: Enable Bluetooth on your mobile device and use the UniFi Network app. Use a computer connected to the UDM-Pro on a LAN port. Go to “Chrome Instructions”. UniFi Network App 1. 2.
UDM-Pro Quick Start Guide 3. Follow the on-screen instructions. Chrome Instructions Use the Chrome web browser to set up your device. 1. Ensure that your host system is on the same Layer 2 network as the UDM-Pro. 2. Launch the Chrome web browser and go to https://setup.ui.com 3. Follow the on-screen instructions of the Setup Wizard. After you run the UniFi Setup Wizard, a login screen will appear for the UniFi Network Controller management interface.
UDM-Pro Quick Start Guide You can manage your network and view network statistics using the UniFi Network Controller management interface. For information on using the UniFi Network Controller software, refer to the User Guide located on our website at: ui.com/download/unifi Specifications UDM-Pro Dimensions Weight With Mount Brackets Interfaces Networking Management Max. Power Consumption 442.4 x 43.7 x 285.6 mm (17.42 x 1.72 x 11.24") 3.90 kg (8.60 lb) 3.99 kg (8.
UDM-Pro UDM-Pro Quick Start Guide Display 1.3" Color Touch Panel LED System HDD RJ45 SFP+ Processor Status Activity Link/Speed/Activity Link/Speed/Activity Quad ARM Cortex-A57 Core at 1.7 GHz System Memory On-Board Flash Storage Operating Temperature Operating Humidity Certifications 4 GB DDR4 16 GB eMMC -10 to 40° C (14 to 104° F) 5 to 95% Noncondensing CE, FCC, IC Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3.
c. Contact a qualified electrician or the manufacturer if there are questions about the UDM-Pro Quick Start Guide installation prior to connecting the equipment. d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection. e. Protective bonding must be installed in accordance with local national wiring rules and regulations. Limited Warranty ui.
Le présent appareil est conforme aux CNR d’ISDE applicables aux appareils radio UDM-Pro Quick Canada Start Guide exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Le présent émetteur radio a été approuvé par ISDE Canada.
Country List UDM-Pro Quick Start Guide AT BE BG CY CZ DE DK EE EL ES FI FR HR HU IE IT LV LT LU MT NL PL PT RO SE SI SK UK BFWA (Broadband Fixed Wireless Access) members noted in blue Note: This device meets Max. TX power limit per ETSI regulations. The following apply to products that operate in the 5 GHz frequency range: Note: This device is restricted to indoor use only when operating in the 5150 - 5350 MHz frequency range within all member states.
