User Manual
Table Of Contents
- Introduction
- Hardware Overview
- Hardware Installation
- Powering the Cloud Key Gen2 Plus
- Optional Rackmount Accessory
- Setting Up UniFi SDN via App
- Pre-installed Software
- Setting Up UniFi Protect via App
- Chrome Instructions
- Setting Up UniFi SDN
- Setting Up UniFi Protect
- Cloud Key G2+ Settings
- HDD Replacement
- Specifications
- Safety Notices
- Electrical Safety Information
- Limited Warranty
- Compliance
- Declaration of Conformity
7
Back Panel
microSD
Slot
Reset
Button
USB Type C
Port
Ethernet
Port
Power
Button
USB Type C
Power Port
Reset The Reset button serves two functions:
•
Restart Press and release the Reset button quickly.
• Restore to Factory Default Settings Press and hold the
Reset button for more than five seconds, until the status LED
begins flashing white.
Power Button
Press to turn the Cloud Key Gen 2 Plus on or off.
USB Type C Power Port Used for power if PoE is not available.
Quick Charge 2.0 or Quick Charge 3.0-compliant USB power
adapter is required.
microSD Slot Optional slot used for external backup
(microSD card not included).
Ethernet Port Connects to a gigabit switch port on your LAN.
Power can be provided by an 802.3af PoE switch, such as the
UniFi PoE Switch.
USB Type C Port Reserved for future use.