User's Manual

17
Chapter 4: Map TabUniFi
™
AP-Mini User Guide
Ubiquiti Networks, Inc.
Placing Access Points on the Map
1. Drag the Access Point icon(s) from the Unplaced APs list
on the left to the appropriate location(s) on the map.
The access point will appear in the area that you placed it.
Wired/Wireless Access Point Shows the
location of the Access Point on the map.
Click and hold this icon to drag the Access Point
to another location on the map. Click the Access
Point icon to reveal additional options. Click a
blank area of the map to hide them.
Lock Locks the selected Access Point in the
current location on the map.
Details Brings up the Details window. This
allows you to view Access Point settings and
connected users. You can also edit the radio
channel, transmit power, uplink, and device
alias.
In the Details window, there are four tabs:
Details, Users, Guests, and Configuration.
• Details Displays details on the Access Point
including the MAC address, model, version,
IP address, uptime, connected users, and
connected guests. Click Uplink (Wire) to
display the speed, duplex, Down Pkts / Bytes,
Up Pkts / Bytes, and Activity. Click Radio to
display the channel used, transmit power, and
packet information.
•
Users Displays the hostnames of the users
that are connected to the selected Access
Point and the IP addresses assigned to them.
You can click the hostname to display
additional details of each user. A window
with Details, Statistics, and Configuration is
displayed. The Details tab displays the MAC
address, hostname, IP address, uptime, and
the name of the connected Access Point. The
Statistics tab displays the channel used, signal
strength, transmit and receive rates, power
saving enabled or disabled, and the number
of packets sent and received. You can also
click History to see a sortable list of events.
The Configuration tab allows you to change
the alias name for the device.
• Guests Displays the MAC address of guests
that are connected to the guest network.
• Configuration Allows you to change the alias
name of the device and channel setting. You
can also set the transmit power to Auto, High,
Medium, Low, or Custom. You can also remove
the Access Point if you no longer want to
manage it with the UniFi Controller software.
Remove Remove the Access Point from the
location on the map.