User's Manual

29
Chapter 10: Access Point DetailsUniFi
™
AP-Mini User Guide
Ubiquiti Networks, Inc.
Compatibility Selects the wireless compatibility mode. By
default this is set to auto. Choose one of the following:
•
Auto Supports wireless b/g/n standards.
• 11n/11g only Only supports wireless-n and wireless-g
devices.
•
11n only Only supports wireless-n devices.
•
11g only Only supports wireless-g devices.
WLANs
Allows the deployment of different WLANs on different
Access Points.
Name Displays the name of the SSID (network name) of
the wireless LAN (WLAN) that is available for the user to
connect to.
Overrides Displays SSID override information applied
to the wireless LAN (WLAN) using the Actions > Override
option.
Actions Click Override to enable a VLAN, set the VLAN ID,
and enter the SSID override name to apply to the wireless
LAN (WLAN).
Enabled Select to enable or clear to disable override
settings on the WLAN.
VLAN Select to enable VLAN or clear to disable VLAN.
VLAN ID The VLAN ID is a unique value assigned to
each VLAN at a single device; every VLAN ID represents
a different Virtual Local Area Network. A value between
2 and 4095 may be entered. For example, in a larger
deployment where there are multiple buildings, it’s
possible that a different VLAN ID is used in each building
while still on the same corporate network.
SSID Enter the SSID override name to apply to the
wireless LAN (WLAN).
PSK If the WPA-Personal security option has been
applied to the WLAN under Settings > Wireless Networks,
the Pre-Shared Key (PSK) for the SSID specified will
automatically appear in this field.
Click Apply to save any changes that you have made. Click
Restore to remove any overrides that were applied to the
selected WLAN. Click Cancel to prevent application of any
changes you have made.