User's Manual
27
Chapter 10: Access Point DetailsUniFi
™
AP-Mini User Guide
Ubiquiti Networks, Inc.
Downlinks
Displays which wireless Access Points are currently
connected to the wired Access Point. Includes details
such as the downlink Access Point (by specified name or
MAC address), signal strength, and the option to remove
the wireless Access Point from the wired Access Point by
clicking remove.
Note: Downlinks will only be visible under
the Details tab when a wireless Access Point
is connected.
Radio (11n/b/g)
Click Radio (11n/b/g) to display the channel and transmit/
receive statistics.
Channel Displays the wireless channel being used.
Transmit Power Displays the EIRP in dBm.
Note: If the device has an external antenna,
you can place the mouse over the icon for
additional details.
TX Pkts / Bytes Displays the number of packets and total
bytes transmitted by the Access Point.
RX Pkts / Bytes Displays the number of packets and total
bytes received by the Access Point.
TX Retry / Dropped Displays the percentage of packets
transmitted that needed to be resent and the percentage
of packets that were dropped.
RX Error / Dropped Displays the percentage of packets
received that needed to be resent and the percentage of
packets that were dropped.
# Users Displays the number of users connected to the
primary network.
# Guests Displays the number of users connected to the
guest network.
Users
Name Displays the name (MAC address if not defined) of
users connected to the primary network of the selected
Access Point. You can click the links under Name to display
additional details of each user (see “User/Guest Details”
on page 34 for more information).
WLAN Displays the name of the SSID (network name) of
the wireless LAN (WLAN) that the user is connected to.
Actions Select from one of the following actions:
• Block Click this button to block a specific user from
accessing the Access Point. This will add the client to the
Blocked Device list.
• Reconnect Click this button to reconnect a specific user
to the Access Point.