User's Manual

24
Chapter 8: Guests TabUniFi
AP-Mini User Guide
Ubiquiti Networks, Inc.
Chapter 8: Guests Tab
The Guests tab displays a list of users that have connected
to the guest network of the Access Point.
Search Allows you to enter text you want to search for.
Simply begin typing; there is no need to press Enter.
Filter by AP Drop-down list of all available Access Points.
Select one to filter the results and display only guests
connected to the selected Access Point.
Page Size Allows you to determine how many results are
displayed per page. Select 10, 20, 30, 40, 60, or 100.
Name/MAC Address Displays the hostname, alias, or
MAC address of the connected guest. You can click the
name to get additional details.
Status Indicates whether the guest is authorized or
not. For authorization, guests must accept the Terms
of Use if the guest portal is enabled and authenticate if
authentication is enabled.
IP Address Displays the IP address assigned to the guest.
Access Point Displays the hostname or alias of the Access
Point. You can click the name to get additional details on
the Access Point.
Signal Displays the signal strength and type (b/g/n) from
the Access Point to the client. If a lightning bolt symbol is
present, the device is in power save mode. The device will
return to active mode when Down or Up activity resumes.
Down Displays the total bytes of data received by the
guest.
Up Displays the total bytes of data sent by the guest.
Activity Displays the level of activity for each guest.
Bars
Activity Level
(Bytes per second)
Idle
500
8000
64000
512000
2048000
Uptime Displays the total time the guest has been
connected for this session.
Actions Click an action button to perform the
appropriate action.
• Block Click this button to block a specific guest from
accessing the Access Point.
• Reconnect Click this button to reconnect a specific
guest to the Access Point.
• Authorize When a guest is in a pending state,
authorization can be granted here manually.
• Unauthorize Removes authorization of wireless guest
access and disconnects the client.